The Heat Pump utilizes worldwide proven technology to capture latent heat from the ambient air and transferring it to water as per requirement, i.e. pool heating, generating hot water, chilled water, and also simultaneously generating hot and chilled water for Air conditioning purpose.

This is done by utilizing minimum amount of electrical energy. In the Heat Pump, there is a eutectic fluid which has a low boiling point; since the boiling point is low it has a tendency to absorb heat from the atmosphere. This heat is upgraded by compression by a compressor. This hot fluid then passes through one side of the heat exchanger and water is passed through the other side of the heat exchanger; there water picks up heat and gets heated. The fluid after losing heat passes through another heat exchanger where water at ambient temperature enters; here the water losses heat and gets chilled generating chilled water, hence in this water-to-water Heat Pump you get hot & chilled water generated simultaneously at one energy cost.

In case of Air to Water Heat Pump, the fan in the Heat Pump draw large quantities of warm air through the evaporator coil that acts as heat collector. The fluid inside the evaporator coil absorbs the free latent heat from the drawn-in-air and transfers heat the same way as stated above.

Note:
For swimming pool heating it is necessary to cover the pool with a pool cover, when not in use.
This will prevent evaporation, the greatest heat loss, to a minimum, thus reducing the heating cost.